Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: roglewjam on March 28, 2015, 03:03:30 PM
-
I have two ICP3300 that were connected via a site to site VPN. These were communcating fine and calls were being routed.
After rebooting one of the systems we cannot get them to establish a connection.
We can PING and TRACERT successfully between both systems but the RMESS VERIFY PBX LAN command from both sides fail with
a "Open Timeout", "Failed to connect to PBX number".
We can also telnet, telnet to port 1066 and port 1067 using laptops from both networks that the PBXs are on.
I am at wits end as to what could be causing the two systems to communicate. The IP trunk settings seem fine.
Would appreciate any help or suggestions. Thanks.