Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: bpone on March 19, 2015, 08:25:03 AM

Title: Maintenance command
Post by: bpone on March 19, 2015, 08:25:03 AM

Hello
is there any maintenance command to show the installed RAM on the 3300 controllers?
Thanks in advance.

     BR/John

Title: Re: Maintenance command
Post by: sarond on March 19, 2015, 08:50:00 AM

Not sure about maintenance commands but you can find the size of RAM installed under the 'Hardware Compute Cards' form.

Title: Re: Maintenance command
Post by: bpone on March 19, 2015, 08:59:05 AM

Sarond
thanks very much.
 :)

Title: Re: Maintenance command
Post by: august on March 19, 2015, 04:44:04 PM

You will see it if you click about at the top right corner.

Title: Re: Maintenance command
Post by: johnp on March 19, 2015, 04:53:11 PM

Quote

You will see it if you click about at the top right corner.

This might only work if you have a current version of MCD running. Which would mean 512 installed. Sarond's method is what I'd do on an older version of 3300 software