Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: Hershel on March 10, 2015, 11:40:12 AM

Title: Time of Day on Remote Phones
Post by: Hershel on March 10, 2015, 11:40:12 AM

Is there any way to change the time zone on an individual or group of phones?

I have a satellite office in a different time zone then the 5000 and I was wondering if it is possible to have the time displayed on the satellite office to be different than the main office phones.

Title: Re: Time of Day on Remote Phones
Post by: 619Tech on March 10, 2015, 01:24:55 PM

At this point I believe the only way is via an MBG connection. The device TZ can be set in that. If you are connecting directly, like most of my customers, there is currently no setting available, that I am aware of.

Title: Re: Time of Day on Remote Phones
Post by: DND ON on March 10, 2015, 03:27:48 PM

I'm not aware of any setting either, other than via the MBG. You can at least change the mailbox time zone.

Title: Re: Time of Day on Remote Phones
Post by: Tech Electronics on March 10, 2015, 04:25:31 PM

Hershel,

I have never done this myself, but if the MBG is capable of changing the time than most likely just giving the phone a different NTP Server may do it. When you setup the phones DHCP Options, Option 42, to give it a different NTP Server. This may require that you shut down the NTP Service within the 5000 and do this for all your sites.

Alternately you might be able to use the HTML Software to modify that as well, but then again I have never tried that either.

Thanks,

TE

Title: Re: Time of Day on Remote Phones
Post by: johnp on March 10, 2015, 05:54:49 PM

I don't think that DHCP will do anything in regards to time