Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Lorax77 on February 27, 2015, 11:48:04 AM

Title: customer changing ISP need to populate new static address's where????
Post by: Lorax77 on February 27, 2015, 11:48:04 AM

I have a customer that we took over service for who is changing his ISP.  The original install was done by Mitel professional services so I am only slightly aware of what is going on, add to that my limited knowledge of the MAS and MBG.
This customer has:
CXii
vMCD
vMBG
vMAS w/MBG

I’m trying to find all the places that would have to be changed to his new block of public address’s, This is what I found so far.
In the MBG configuration tab/networkprofiles/custom configuration/ I have found:

vMBG                   ICP-Side 192.168.70.1
                              set-side 2xx.xxx.xxx.10

vMAS MBG          ICP-side 2xx.xxx.xxx.3
                              set-side 2xx.xxx.xxx.3

Is this the only place I have to change the address’s?
Do I need to do anything in the base MSL that these run on?
How will this affect the AMC?
Thanks in advance for all help.

Title: Re: customer changing ISP need to populate new static address's where????
Post by: ralph on February 27, 2015, 04:07:08 PM

There is going to be a couple of IP addresses to change in the MAS portion of the vMCD.

Ralph

Title: Re: customer changing ISP need to populate new static address's where????
Post by: Lorax77 on February 27, 2015, 04:43:22 PM

Ralph,

Thanks for your reply, what forms in the vMCD would those changes be made to?

I've posted this same question to the Applications forum with a little more details added.

Thanks,