Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: cjiwonder on February 19, 2015, 05:53:26 AM

Title: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: cjiwonder on February 19, 2015, 05:53:26 AM

We are using Mitel 3300 ICP. Instead of using Mitel 5212 IP phone, can I use any IP phone software from my Laptop / Android Phone.

Thanking you in anticipation.

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: wiseguy on February 19, 2015, 06:49:32 AM

The later versions of software on Mitel 3300 use one and the same license for an IP phone or SIP phone. If you are on a load that this you can setup SIP softphones or any SIP phone to communicate.

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: oetienne on February 19, 2015, 11:15:17 AM

Hi,

You can use on your computer "x-lite" from counterpath
http://www.counterpath.com/x-lite-download/

Regards
Olivier

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: cjiwonder on February 20, 2015, 04:38:02 AM

Thanks for your prompt reply.

Our software version is 7.1.5 13. This version is enough or I have to upgrade to latest version? If I have to upgrade then pls brief me about upgrade to latest version.

Thanks.

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: cjiwonder on February 20, 2015, 04:58:43 AM

Quote from: oetienne on February 19, 2015, 11:15:17 AM

Hi,

You can use on your computer "x-lite" from counterpath
http://www.counterpath.com/x-lite-download/

Regards
Olivier

Thanks. How to configure xlite for MCP 3300. I have installed xlite in my Laptop but I don't know how to use. I am new to IPBX, Pls guide me.

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: jmurray on February 27, 2015, 01:56:45 PM

Add a new IP telephone in the 3300.  Assign it a number, etc.  Under the device type choose "Generic SIP Phone".  Once the device has been added to the 3300, go to the Access and Authentication tab for the device and enter a User PIN that will be used for authentication.

In X-lite go to your SIP Account settings and add a new account.  Include the following:
Username: Extension of SIP device in 3300
Password: User PIN of SIP device in 3300
Domain: IP address of 3300

That should at least get you connected.

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: acejavelin on March 02, 2015, 05:38:13 PM

Quote from: cjiwonder on February 20, 2015, 04:38:02 AM

Thanks for your prompt reply.

Our software version is 7.1.5 13. This version is enough or I have to upgrade to latest version? If I have to upgrade then pls brief me about upgrade to latest version.

Thanks.

ICP 7.1.5.13 is extremely old, you cannot just switch between Mitel and SIP devices at this software level if I recall correctly. You will need to upgrade to roughly current software (MCD 7, which is 12.x.x.x release).

This will require a Mitel vendor, as Software Assurance and AMC changes to occur, as well as software, and possibly hardware depending on your configuration and platform.

Title: Re: FREE IP SOFTWARE PHONE FOR 3300 ICP
Post by: x-man on March 03, 2015, 07:11:58 AM

You can still buy SIP licences for that level of software if required.