Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mszodiac on December 18, 2014, 10:27:32 AM

Title: E2T card can't load boot file
Post by: mszodiac on December 18, 2014, 10:27:32 AM

Hi Everyone,
  I was able to program the E2T card on the main controller (MXeIII rel 6 SP2) but can't do it on the resilient controller.  I keep on getting "Can't load boot file!!"

I've reseated the card, rebooted the MCD.


VxWorks System Boot
Copyright 1984-2002  Wind River Systems, Inc.
CPU: Mitel MMC-C PPC83XX F2500
Version: VxWorks5.5.2
BSP version: 3.1/11
Creation date: Aug 10 2012, 10:47:30

Press <SPACE><SPACE><SPACE> to stop auto-boot AFTER countdown starts...
<7><6><5><4><3><2><1><0>
auto-booting...

boot device          : qefcc
unit number          : 0
processor number     : 0
host name            : bootHost
file name            : /sysro/E2T8260
inet on ethernet (e) : <IP:Mask of E2T>
host inet (h)        : <IP of MCD>
gateway inet (g)     : <IP gateway programmed on the MCD>
user (u)             : ftp
ftp password (pw)    : @
flags (f)            : 0x0  --> DHCP disabled
other (o)            : qefcc

Attached TCP/IP interface to qefcc0.
Attaching network interface lo0... done.
Loading...
Host <IP of E2T card> is not responding
Error loading file: errno = 0x3d0001.
Getting boot parameters via tftp from 192.168.1.2:slot1.cfg.

192.168.1.2:slot1.cfg: tftp transfer failed: errno 0x4b0007

Getting boot parameters via tftp from 192.168.1.8:slot1.cfg.

192.168.1.8:slot1.cfg: tftp transfer failed: errno 0x4b0007

Can't load boot file!!

Title: Re: E2T card can't load boot file
Post by: 619Tech on December 19, 2014, 06:31:48 PM

Maybe try setting the E2T for DHCP to see if can establish connectivity? Then re-static it after it upgrades.