Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: dh_lab on February 04, 2010, 10:49:44 AM

Title: firmware
Post by: dh_lab on February 04, 2010, 10:49:44 AM

colud anyone tell me how i check the sets firmware, i am using 5330,5212 and 5302 sets. system R8.0


dh

Title: Re: firmware
Post by: v2win on February 04, 2010, 01:23:31 PM

The easiest way it to reboot the set. It will tell you the rev when the set boots.

Title: Re: firmware
Post by: bobcheese on February 04, 2010, 02:15:11 PM

in maintenance commands type 'loc ext <number>' and the system will display a PLID fo rthe IP set. take this PLID and type 'firm PLID <PLID>'

not supported on AX controller or 5302 sets

Title: Re: firmware
Post by: dh_lab on February 06, 2010, 10:52:33 AM

i am able to check firmware for the sets with command, but from the 5302 sets like as mentioned i cannot, so how could i check 5302 firmware.if i reboot 5302 how can i check the firmware?

dh

Title: Re: firmware
Post by: bobcheese on February 07, 2010, 01:31:16 PM

You don't. They have no screen so will not display anything. You would need to check the R8.0 Release notes for the set firmware load for that SW