Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: tifoski on November 21, 2014, 08:46:09 AM
-
Hello,
I need to update the firmware on my Mitel IP Phone 5224, which is 2.0 currently. My MCD is at version 6 and thus not updated directly. Need firmware version 3.0 so after that I can update the IP Phone directly by MCD. Can anyone help me? I need the BOOTIP and L2BOOT. Thanks
Best regards,
Lucas Tifoski
-
The built-in TFTP server on MCD6 still includes the required boot files for a 5224.
-
Yes, but the 5224 can not upgrade directly from version 2 to 6. It must be version 3 or higher to update directly. As the 5224 is version 2, i need to update locally to version 3, and after that connect the MCD and upgrade directly. Can help me with version 3?
Thanks,
Lucas Tifoski
-
Are you talking about SIP firmwares? Because otherwise the answer from lundah would be correct.
-
I'm talking about BOOTIP and L2BOOT. For if my IP Phone was with version 3 of both, I could directly upgrade to the current version by MCD. However, as it is in version 2, it does not directly updated by the MCD. Would need to upgrade locally by a machine with a TFTP server and after that connect the IP Phone to the MCD to upgrade to the current version. Of 2 for the current not updated, only from the third.
Thanks,
Lucas Tifoski
-
Do you have access to MOL?
You could try and download an old version of 3300 software, maybe release 6 and then extract the IP Phone FW.