Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: jscottbradford on November 10, 2014, 03:03:04 PM

Title: Analog to IP (SPA122)
Post by: jscottbradford on November 10, 2014, 03:03:04 PM

I have a MITEL 3300 through a WAN to several remote sites. Works great for IP phones but I want to put Analog phones at these sites and use the IP WAN back to our central 3300.  I was looking at devices such as the Cisco SPA122... has anyone done this though their LAN rather than through a broadband connection which is what these seem to be designed for.

confirmation accepted but setup/configuration info would be even better!

Thanks.

Title: Re: Analog to IP (SPA122)
Post by: johnp on November 10, 2014, 03:48:31 PM

You should be able to connect the wan port to the lan at the remote locations. As long as the lan ip doesn't conflict it should work fine. I don't think you will have anything besides the phone(s) connected to the ata anyway.