Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: tone-the-phone on October 23, 2014, 09:11:45 AM

Title: pausing a speedcall
Post by: tone-the-phone on October 23, 2014, 09:11:45 AM

When setting up a speedcall is it possible to put a pause in the actual number to give a couple of second pause before continuing, similar to what we could do by putting a , in a modem string.
What I would like to do is set up a speedcall on a remote switch to enter the direct trunk access code followed by the trunk number then the digits on the trunk and I think I may need a pause between the trunk number and digits.
I am running an SX2000 Lite with SX.Q.23.5

Title: Re: pausing a speedcall
Post by: v2win on October 24, 2014, 11:14:37 AM

I think its the letter P int the dialstring

Title: Re: pausing a speedcall
Post by: tone-the-phone on November 17, 2014, 04:41:28 AM

Thanks I'll give it t try