Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: ksurratt on October 21, 2014, 04:43:00 PM

Title: Ethernet session quick logout or no connection
Post by: ksurratt on October 21, 2014, 04:43:00 PM

I have several sx2000 that will disconnect the Ethernet connection within 10-15 seconds of login or I can log in but the cursor stays below the password.  I can fix it by rebooting the switch, but it comes back within a few days or weeks.  Any ideas?  Thanks

Title: Re: Ethernet session quick logout or no connection
Post by: v2win on October 22, 2014, 03:02:05 PM

Sounds like a bad processor to me.

Title: Re: Ethernet session quick logout or no connection
Post by: lundah on October 23, 2014, 11:13:59 AM

I'd suspect a bad MC3E card as well, but you might want to run an extended ping test to the IP of the card just to be sure. Ping Plotter is a handy little tool that's good for this.