Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: skipskip on October 09, 2014, 04:34:25 AM

Title: Mitel CS5000 - Latency/Jitter table
Post by: skipskip on October 09, 2014, 04:34:25 AM

Hi Guys,

I'm trying to find an "official" guide from Mitel regarding latency/jitter requirements. and even better if there was some table that would identify what call quality we would expect on certain RTT ranges?

Thanks
Skip

Title: Re: Mitel CS5000 - Latency/Jitter table
Post by: Tech Electronics on October 09, 2014, 07:23:53 AM

Skipskip,

I have never seen a document from Mitel concerning such matters, although there may be something out there for the Sales a Engineering side of it.

Are you having problems with a remote phone? I am guessing since you were worried about RTT (Round Trip Time), but typically this is only a factor for remote phones and you would need to adjust your IP packets according to your issues.

Thanks,

TE

Title: Re: Mitel CS5000 - Latency/Jitter table
Post by: sarond on October 09, 2014, 08:02:33 AM

This is from the 3300 Voice Quality Troubleshooting doc.
Assume it would still be relevant for 5000.

Title: Re: Mitel CS5000 - Latency/Jitter table
Post by: Tech Electronics on October 09, 2014, 11:06:11 AM

Sarond,

That would be relevant for any VoIP installation, but it is a good reference.

Thanks!

TE

Title: Re: Mitel CS5000 - Latency/Jitter table
Post by: sarond on October 09, 2014, 07:54:58 PM

Here is another from inter-tel days.