Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Butters on November 25, 2009, 04:08:37 PM

Title: 3300 html interface hang (ethtask: netjobadd" ring buffer overflow)
Post by: Butters on November 25, 2009, 04:08:37 PM

The last 2 weeks I've had issues where I cannot connect to html interface on the 3300 controller.
It works a few times after a scheduled reboot, but then stops responding.

I connected to the maintenance interface and it is scrolling with the message (ethTask): panic: netJobAdd: ring buffer overflow!
Using the inetstatShow command, I see hundreds of connections in Time Wait status on port 443 of the controller  to pc's I used to connect to it.
It's like it's not disconnecting my sessions after logout or timeouts.
Does this require a hard reset and downtime?

Is there a command I can run to clear all TCP connections???

Thanks for reading and helping  ;)

Title: Re: 3300 html interface hang (ethtask: netjobadd" ring buffer overflow)
Post by: ralph on November 30, 2009, 10:12:57 AM

I've seen this before.
The cause turned out to be a Network monitoring tool that was checking to see if HTML was working.
Are you using something like Whats Up Gold?

Ralph