Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: chillimintlabs on August 26, 2014, 07:57:07 AM

Title: Inbound SIP configuration
Post by: chillimintlabs on August 26, 2014, 07:57:07 AM: Hi,

I'm trying to get inbound SIP calls into our Mitel 5000 (via an asterisk server). All the settings seem correct, however i'm getting this in the asterisk logs:

-- Goto (incoming,0161XXXXXXX,16)
-- Executing [0161XXXXXXX@incoming:16] Dial("SIP/peer6-4e76d4-0000000f", "SIP/0161XXXXXXX@192.168.50.150")
== Using UDPTL CoS mark 5
== Using SIP RTP CoS mark 5
-- Called SIP/0161XXXXXXX@192.168.50.150
-- Got SIP response 503 "Service Unavailable" back from 192.168.50.150:5060
-- SIP/192.168.50.150-00000010 is circuit-busy
== Everyone is busy/congested at this time (1:0/1/0)
-- Auto fallthrough, channel 'SIP/peer6-4e76d4-0000000f' status is 'CONGESTION'

Any help appreciated on how to diagnose the issue. It seems the Mitel is rejecting the call with 503 Service Unavailable.

Thanks
Title: Re: Inbound SIP configuration
Post by: bluewhite4 on August 26, 2014, 08:03:13 AM: What's the inbound routing point of the SIP trunks on the Mitel?
Title: Re: Inbound SIP configuration
Post by: chillimintlabs on August 26, 2014, 08:31:20 AM: I've got a SIP Trunk Group (92003) which has day/night ring-in type set to call routing table 4, then in that table I have the DDI going to a single extension.
Title: Re: Inbound SIP configuration
Post by: bluewhite4 on August 26, 2014, 01:28:26 PM: What about the reverse? Making a call from the Mitel to the Asterisk?
Title: Re: Inbound SIP configuration
Post by: NTEDave on August 27, 2014, 03:48:05 AM: What Bluewhite4 says and have you got the relevant licenses on the system and trunks assigned to the group?