Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: towerhosp on August 21, 2014, 10:03:08 AM

Title: SX200 - how to debug or trace call
Post by: towerhosp on August 21, 2014, 10:03:08 AM

I'm troubleshooting an SX200 with a PRI, can make outbound calls, but cannot receive inbound. Debugs from SIP T1/PRI gateway shows calls being rejected by the PBX. Can anyone tell me how to obtain a log or trace or enable debugging on the Mitel so I can diagnose further? Thanks in advance.