Mitel Forums - The Unofficial Source

Mitel Forums => Mitel Software Applications => Topic started by: Mattmayn on July 30, 2014, 12:15:02 AM

Title: Resilient NPM
Post by: Mattmayn on July 30, 2014, 12:15:02 AM

How do I make Nupoint resilient? Do I split my ports across two 3300s or do they work just like normal IP sets?

NPM on MAS with MCD 6.0 on the 3300s.

Title: Re: Resilient NPM
Post by: bluewhite4 on July 30, 2014, 08:16:56 AM

They work like normal IP sets, so just make the ports themselves resilient to another controller.

Title: Re: Resilient NPM
Post by: Mattmayn on July 30, 2014, 07:41:40 PM

I did that, rebooted primary to simulate failover and I didn't get audio from secondary. Looks like the ports answered, just no audio. If the ports are programmed as trusted, is there somewhere in the secondary/Nupoint that I need to associate this?

Title: Re: Resilient NPM
Post by: bluewhite4 on July 30, 2014, 09:34:04 PM

I'll look in the morning. Thought I took that directly out of engineering guide or something.

This is a standalone, right? Not a MAS?

Title: Re: Resilient NPM
Post by: Mattmayn on July 30, 2014, 09:35:49 PM

It is MAS. I think I had some SDS errors messing me up. Sorting through that now and will test in a little while.

Title: Re: Resilient NPM
Post by: bluewhite4 on July 30, 2014, 09:36:38 PM

Ah ok. It may not work with MAS...I've only ever done it with standalone.

Title: Re: Resilient NPM
Post by: Mattmayn on July 30, 2014, 09:50:28 PM

It works once you get all of the SDS errors fixed.

Title: Re: Resilient NPM
Post by: glenndmartin on August 03, 2014, 03:33:43 PM

Also make sure that if the res MCD is on a different subnet you add the required network into the local networks list on the MSL for MAS or Nupoint