Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: evan631 on November 05, 2009, 11:40:49 AM

Title: Analog ports on back of 3300
Post by: evan631 on November 05, 2009, 11:40:49 AM

I need to test a fax machine, however we do not have any POTS lines in house.  I do know we have a three of teh ONS ports on the back of the 3300 configured.  Could i just setup the 4th ONS port on the 3300 with the sames settings as the others, but just give it a different number?

these are the settings on the other ports....

Cabinet       Shelf       Slot       Circuit       Card Type       Number       Circ. Desc. Index       Interconnect Number       Non-Busy Ext.       Tenant Number       
  2  1  1  1  Hybrid 4 ONS 6 LS  7999  1  1  No  1 
  2  1  1  2  Hybrid 4 ONS 6 LS  8898  1  1  No  1 
  2  1  1  3  Hybrid 4 ONS 6 LS  7998  1  1  No  1 
  2  1  1  4  Hybrid 4 ONS 6 LS        No  1 

Thanks

-Evan

Title: Re: Analog ports on back of 3300
Post by: ralph on November 05, 2009, 02:28:01 PM

That should work.  Just renumber to a DID and you should be fine.  If you have trouble dialing out, adjust your COR.

Ralph