Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Mattmayn on October 29, 2009, 12:33:41 PM

Title: Tie trunks
Post by: Mattmayn on October 29, 2009, 12:33:41 PM

I am attempting to connect a 3300 Mxe running MCD 4.0 with a Nortel Option 11 using PRI. Not being successful any suggestions?

Title: Re: Tie trunks
Post by: ralph on October 29, 2009, 04:41:47 PM

Should work via qsig if your Nortel software is at a version that supports it.
If not, a straight T1 with Digital E&M will work.

Ralph

Title: Re: Tie trunks
Post by: Mitel100 on October 29, 2009, 04:44:15 PM

What PRI setup have you got running,I would recommend QSIG. as I have seen this working fine Also, what problems are you experiencing with the setup?

Title: Re: Tie trunks
Post by: v2win on October 29, 2009, 10:05:18 PM

I had ours in the office running as NI2 with the 3300 as master.

The only problem I had was getting the clocks to sync.

Title: Re: Tie trunks
Post by: Mattmayn on October 30, 2009, 07:49:44 AM

We were able to get a link with QSIG but the D-Channel would not come up.

Title: Re: Tie trunks
Post by: v2win on October 30, 2009, 11:09:07 AM

Who is master and who is slave.

I had a similar problem one the clock on the Nortel synced up the D channel came up.

Title: Re: Tie trunks
Post by: Mattmayn on November 02, 2009, 10:35:24 AM

D-channel is now up.

NI2 I'm (3300) the master.

Getting Call Barred on display, what causes this?

Title: Re: Tie trunks
Post by: ralph on November 02, 2009, 11:50:43 AM

Called barred can be caused by the 3300.   COR is not correct or in COS the Public Connection is not allowed.

Ralph

Title: Re: Tie trunks
Post by: Mattmayn on November 02, 2009, 12:07:37 PM

I have no COR and the COS has public-to-public

Title: Re: Tie trunks
Post by: v2win on November 02, 2009, 12:41:34 PM

public network access via dpnss

Title: Re: Tie trunks
Post by: Mattmayn on November 02, 2009, 01:25:19 PM

check, I was lazy and didn't type out the options. Sorry.

Title: Re: Tie trunks
Post by: v2win on November 02, 2009, 02:38:41 PM

interconnect restriction?

Title: Re: Tie trunks
Post by: Mattmayn on November 02, 2009, 03:12:13 PM

SOLVED! Nortel tech finally listened to my QSIG request and it works.

Title: Re: Tie trunks
Post by: v2win on November 02, 2009, 06:35:15 PM

Mexico or India?

Title: Re: Tie trunks
Post by: Mattmayn on November 03, 2009, 10:26:50 AM

US

Title: Re: Tie trunks
Post by: ralph on November 03, 2009, 11:34:37 AM

Quote from: Mattmayn on November 03, 2009, 10:26:50 AM

US

You got help from Nortel US?   Wow!  Who do you know?!!! <g>

Ralph

Title: Re: Tie trunks
Post by: Mattmayn on November 03, 2009, 02:49:51 PM

My bad, it was AT&T internal tech support. They have a maint contract on the switch.

Title: Re: Tie trunks
Post by: ralph on November 03, 2009, 03:42:59 PM

Mattmayn,   
'ATT' explains quite a bit.   If you happen to be in around Michigan, let me know.   We happen to be one of the largest Nortel dealers in Michigan.

Ralph

Title: Re: Tie trunks
Post by: Mattmayn on November 05, 2009, 09:51:04 AM

I'm in GA, not quite your service area.

Title: Re: Tie trunks
Post by: ralph on November 05, 2009, 11:12:27 AM

GA is close to us.  We'd just have to drive a bit longer, as in 16 hours. <g>

Of course our remote services center is really close.
Ralph