Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: SUSD on April 15, 2014, 04:28:04 PM
-
3300 MXe 2-Clustered Rel 4.2 / 10.2.0.26_2 EMB-VM 6-SX200 10-ASU
When I use the "Locate all free dn 7700 to 7799" (using any DNs) I get the response:
LOCATE: Warning! file *.LOCATE.FREE_DN will be overwritten.
7700 - 7799
The free DNs within the given range can be found in *.LOCATE.FREE_DN.
My Question - This file that will be overwritten, *.LOCATE.FREE_DN. How would I see this file and why do I care that it's being overwritten ?
Thank you,
-
You'd have to FTP into the controller to pull the file.
I don't see a reason why you'd care that its being overwritten, other than if you wanted to refer back to what the command might have told you previously.
I usually just copy the commands reply into a text file while working, and then just close it when I'm done.
-
It's just a container to hold the most recent output for the command.
-
Excellent,
I was hoping to hear exactly that.
Thank you!
-
I have just run across this as well. However which Folder will i find the file in. I tried a search and didn't find it?
-
If you FTP into the controller, it's in /db/cc/locate. However, I'm not sure what the file format is. You should be able to issue the "type" command to write the file contents to the maintenance command output window, though.