Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: Crowtalks on April 14, 2014, 05:34:31 PM

Title: SX200 System Option number question
Post by: Crowtalks on April 14, 2014, 05:34:31 PM

I was programming some analog extensions and received a MOS warning about exceeding the license.

What does system option (maximum devices) cover? Does it cover all user devices allowed, including IP phones, that will receive an extension number? If that's not it, what does it mean?

After I received the error, I asked the programming engineer that designed the system and ordered the licenses what this option means and "his highness" can't be bothered to answer the question so I can find out what has been exceeded.

Thanks, Jim

Title: Re: SX200 System Option number question
Post by: acejavelin on April 15, 2014, 01:59:41 PM

It includes everything programmed as a "device", you can go into maintenance and see a screen with all devices in use/programmed.

Title: Re: SX200 System Option number question
Post by: Crowtalks on April 16, 2014, 09:32:58 AM

Hi, thanks for the reply.

When I go into Maintenance - Show - Device, I don't find an option to see all the devices...

sorry if this seems simple, but I am fairly new to the 200 platform...

Jim

Title: Re: SX200 System Option number question
Post by: acejavelin on April 17, 2014, 01:18:29 PM

Try Maintenance -> System -> Show -> LN_APP_COUNT

Title: Re: SX200 System Option number question
Post by: Crowtalks on April 17, 2014, 02:23:57 PM

Yup, that was it, thanks again

Jim