Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: kwahodi on April 10, 2014, 03:13:29 AM

Title: Caller ID for incoming calls showing Trunk Label
Post by: kwahodi on April 10, 2014, 03:13:29 AM

Hi,

Im having this issue on a site where by incoming calls are coming up on the screens as E1 (PRI Trunk label). How can I get it to show up as the number calling?

These are my COS settings for the Trunk:

Display ANI/DNIS/ISDN Calling/Called Number - Yes
Display ANI/ISDN Calling Number Only  -  Yes
Display Caller ID on multicall/keylines - Yes
Display DNIS/Called Number Before Digit Modification - Yes

These are the COS settings for the phones:

Display ANI/DNIS/ISDN Calling/Called Number - Yes
Display ANI/ISDN Calling Number Only - Yes
Display Caller ID on multicall/keylines - Yes
Display DNIS/Called Number Before Digit Modification - Yes

I'm I missing something here? The phones are 5224. System is a cxi running on MCD 6.0 SP2

Cheers!

Title: Re: Caller ID for incoming calls showing Trunk Label
Post by: sarond on April 10, 2014, 03:54:57 AM

Do you have CLIP enabled from the Carrier?
You might want to try EDT Traces to see if they are presented at the PRI level.

Title: Re: Caller ID for incoming calls showing Trunk Label
Post by: johnkeri on April 11, 2014, 10:47:47 PM

The trunk label is displayed if caller ID is not available.
Sarond is right, check with the system or call your provider.

Title: Re: Caller ID for incoming calls showing Trunk Label
Post by: LoopyLou on April 14, 2014, 07:46:44 AM

Agreed. If the number is not sent, you get the trunk label as a default.