Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: rugsy on April 07, 2014, 08:38:10 PM

Title: speakerphone idea
Post by: rugsy on April 07, 2014, 08:38:10 PM

Hi guys, not purely a Mitel question, but I'm using 5320 handsets so I guess it counts..
Does a device exist, that is a conference speakerphone (like a polycomm triangle or a saucer) that can connect to the standard RJ11 headset port? Basically the idea is to use the standard IP phone to dial, but enhance audio quality by hanging a big speaker/microphone off the device for conference purposes instead of a tiny headset. Essentially it's just a bigger version of a headset, however I can't find a suitable product.

Title: Re: speakerphone idea
Post by: bluewhite4 on April 07, 2014, 09:43:57 PM

There used to be such a device. It would attached to the side of a 5220 or 5224, and have a saucer conference module off of it.

But it has been discontinued for several years now. And I don't know if it would would on a 5324 on a 5000 which would need to be the config you'd have to have.

Title: Re: speakerphone idea
Post by: dwayneg on April 08, 2014, 08:32:08 AM

The Konexx adapter is exactly what you're asking for.  PN 8574 at HelloDirect, but available other places as well, about $100.

Title: Re: speakerphone idea
Post by: rugsy on April 11, 2014, 12:42:21 AM

thanks for the replies, just in case anyone else wants to know I got the Phoenix Duet Executive