Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on March 20, 2014, 11:54:22 AM

Title: Mixed Protocols on Dual Framers
Post by: ralph on March 20, 2014, 11:54:22 AM

Does anyone know of any issues with having a PRI on one half of a Dual Framer card and a T1 on the other?

Ralph

Title: Re: Mixed Protocols on Dual Framers
Post by: jrg0852 on March 20, 2014, 12:23:53 PM

I never have. On a small to mid size job, especially financial in nature, this is the norm. As long as programming is correct, and you are having issues (what are the issues?) I would look at these possibilities:

Faulty dual framer (although this seldom happens)

Make sure card is properly seated and has the 3 screws firmly in place

Could try a different MMC slot

What are the symptoms?

Title: Mixed Protocols on Dual Framers
Post by: pmhaynes on March 21, 2014, 02:24:46 AM

I had a similar question in the uk. Pri and dpnss/ dass2. It is now supported on latest software. 


Sent from my iPhone using Tapatalk