Mitel Forums - The Unofficial Source
Mitel Forums => Mitel Software Applications => Topic started by: glenndmartin on February 24, 2014, 10:19:29 AM
-
have got a quick question regarding queue conditions via IVR
I have got a customer that has asked for the following
If there are no agents logged in they want to play a message which is not a problem
If agents are idle , make busy or in work timer they want the call to be placed to the path via a transfer action,
We have tested this and when an agent is in make busy or in work timer the agent is moved into unavailable state on CCC so the call is routed via the no agents action on the IVR
I need to be able to route based on advance agent states not just idle or logged out
thanks in advance
-
Should be able to achieve this with the Path Assignment options, which doesn't necessarily need to be modified in MiCC since it's the base call processing in the 3300. In particular, you can play around with the Interflow settings to choose what do to with a call queued when agents are logged in but unavailable. You can use the interflow timer to select how long to let the call remain queued and then set a destination to send the call to after that timer expires.
-
hello mate that is a good shout
the customer would like to do this via the MICC/IVR as they make all the changes
-
Might be able to do it in the queue settings in YSE (MiCC/PF/CCM/YSE calls it a queue instead of a path, but it's the same thing), but I'm not 100% sure on that.