Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: reval on February 13, 2014, 01:03:10 PM

Title: Establish an E1 link between MXeIII and TETRA Ruhil Radio system
Post by: reval on February 13, 2014, 01:03:10 PM

Hi Friends,

We have a TETRA radio system. We are going to establish an E1 link between this radio system and a Mitel MXeIII controller in order to make call from analog extension to Radio handhelds.

I defined a rout and a 30 circuit trunk group. Whenever call from analog phones e.g extension number 3232 to a radio handheld which its ID number is 401, after a few second silence, Mitel return a dial tone and radio handheld does not ring.

Guide me please
thank you in advance

Title: Re: Establish an E1 link between MXeIII and TETRA Ruhil Radio system
Post by: jrg0852 on February 13, 2014, 02:19:07 PM

I think the only thing missing is in ARS. You will need to specify 4XX as digits dialed using the route you made for the E1. Let me know if this does it.

Title: Re: Establish an E1 link between MXeIII and TETRA Ruhil Radio system
Post by: reval on February 16, 2014, 04:35:30 AM

you were right.
with some modification in ARS it is working now.
Thank you so mush