Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: greg.kosa on January 22, 2014, 12:01:19 PM

Title: Autoboot failed
Post by: greg.kosa on January 22, 2014, 12:01:19 PM

Hi,

Can someone tell me what's the meaning of this error message?

MIPS *** Autoboot: Trying device 'eth0' file 192.168.1.2:vmlinuz (eth0,tftp) ***
MIPS *** Autoboot failed ***

This message keeps popping up in the logs after a reboot, then after about 40 minutes

MIPS *** Autoboot: Trying device 'eth0' file 192.168.1.2:vmlinuz (eth0,tftp) ***

And no failed message appearing after.
Thanks in advance, best regards.

Title: Re: Autoboot failed
Post by: jrg0852 on January 22, 2014, 12:23:11 PM

Out of curiosity, are your 2 LAN ports set the same as the voice switch you are connecting to? Almost sounds like it doesn't like the handshake.

Title: Re: Autoboot failed
Post by: greg.kosa on January 22, 2014, 12:55:44 PM

Thanks for your reply. Could you be more specific please? Which 2 LAN ports do you mean? What type of handshake are you referring to?

Title: Re: Autoboot failed
Post by: jrg0852 on January 22, 2014, 04:36:04 PM

I see from Tek-Tips that this is a Cxi. I would make sure all of the ports (the built in ones and LAN) match the voice switch you said you are connecting to.