Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Tech Electronics on January 02, 2014, 10:04:40 PM
-
Hello Everyone,
Since I am new to the 3300 MCD I am not sure if this is possible or not, but a customer of mine is changing from an Inter-Tel Axxess to a 3300 and wants to continue to route calls based on Outside Calling Party Number.
Basically, they have certain numbers that are known for harassment calls/faxes that they just want to hang up on and all other calls will follow the normal call flow; is this possible in a 3300?
If this is possible could you provide some detailed information on how to set it up?
Thanks,
TE
-
The 3300 doesn't have this option, but this can be done by using the IVR solution.
-
What voicemail? A Nupoint can do it.
-
About once a month I see here some variant of a request for blocking incoming calls based on caller ID.
I've heard a rumor that Mitel may add that into a future release but I wouldn't hold my breath.
After meeting with a group of techies last December, I may have an inexpensive "off board" solution that would do this.
Unfortunately I don't have time to test and document.
I put up a poll to gauge interest to see if it would be worth my time but only 8 people voted.
You can see it here. (http://mitelforums.com/forum/index.php/topic,4601.msg19795.html#msg19795)
Once I'm through this major project I'm on perhaps I'll have time to test, document and throw online.
But I'd think I'm about 3 months out from even thinking about it at this time.
But to answer your question, no, the 3300 doesn't do that.
As others have suggested you can do it via a NuPoint or PraireFyre IQ.
Ralph
Ralph
-
Everyone,
Thanks for pointing me in the right direction on this. I do have a NuPoint so I looked in the Call Director area as I figured that is where it would have to be and I do see a call action called Caller ID that seems like it would work for me. If this is the correct route to take then are there any "catch-22" things I should know about before trying to implement this.
The one thing I see so far is that they would need a Call Director Box for Every Personal DID so that each individual can block the numbers the need to for their DID, ie that is a lot 101 users. Is there anything else I would need to look at for this?
Thanks,
TE