Mitel Forums - The Unofficial Source
Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: markdevoll on December 28, 2013, 04:24:15 PM
-
i have a customer that wants to be able to answer lines but not have them ring on her set.
i have a 4 lines in a co trunk group pointing to a hunt group with an extension list with 3 sets. the 3 sets ring and can answer the line but the other sets cant. i used trunk group keys on the sets so the customer can see the lines and select what lines they want to use to dial out. she can pick up the trunk and dial out but when the lines rings it says trunk group busy. any ideas?
-
Add her extension to Answer Access list in the trunk group.
-
where is that?
-
i found it. thanks for the help.
-
Markdovell,
Did you turn this customer into a KSU just so one person can answer incoming calls without it ringing them directly?
The error you have is showing correctly as busy since the Hunt Group is in control of the call and therefore it is busy and you are not allowed to take over the line manually.
The simple route would be to train the person to do a reverse transfer from the Hunt Group receiving the calls.
Give the user a DSS/BLF of the Hunt Group so they can dial 4, the default reverse transfer code, and press that button to answer calls ringing the Hunt Group.
You could also set the Hunt Group's [Group Call Pick-up Flag] if they just want to reverse transfer from one of the 3 stations, but this also allows them to answer any call directed to that station which is not ideal.
Hope that provides you with a better solution.
Thanks,
TE
-
it is now working.
-
Markdevoll,
Just out of curiosity what was your finally solution build?
Thanks,
TE