Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: JK on December 06, 2013, 11:40:44 AM

Title: Print cmd for sx2000 to the screen
Post by: JK on December 06, 2013, 11:40:44 AM

I am looking for the cmd to print to the screen on a sx2000

Title: Re: Print cmd for sx2000 to the screen
Post by: ralph on December 06, 2013, 08:55:57 PM

To print a screen?
No such animal in the 2k.
Are you looking to print the forms?
I suppose if you're just looking for screen captures you could do a simple cut an paste or use the windows snipping tool.

If you're using Procomm then you can set up a printer in windows as a print to text printer.  Use the "Generic" model of printer.
Then the command to print in the 2k is "FO <form name> instance <instance or all> /port lpr3"
Do a "show print lpr3" until you see the formprint queued up.   Then enter "en pr/n"
When the printout is done then do a <CTL-C>

Ralph

Title: Re: Print cmd for sx2000 to the screen
Post by: lundah on December 09, 2013, 10:58:41 AM

I'm a little rusty, but I think "type" might be the command you're looking for, if for example you want to display a traffic report on the maintenance terminal screen.