Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Nyghtwing on October 22, 2013, 03:24:02 PM

Title: Intercom/Loudspeaker Paging
Post by: Nyghtwing on October 22, 2013, 03:24:02 PM

Can the 3300 ICP CX Controller do intercom and loudspeaker paging at the same time. Right now i can do either/or, but my people would like to just press 1 button/1 access code and it page over both at the same time. Is this possible?

Title: Re: Intercom/Loudspeaker Paging
Post by: august on October 22, 2013, 07:34:44 PM

It's not possible in the 3300, but one way to do it is to connect the speaker of one phone to the paging system.

Title: Re: Intercom/Loudspeaker Paging
Post by: johnp on October 23, 2013, 07:11:19 AM

Quote

It's not possible in the 3300

I think an IP paging unit does just this

Title: Re: Intercom/Loudspeaker Paging
Post by: Mattmayn on October 23, 2013, 07:30:28 AM

The page unit will do it. You connect it to the paging system and put it in a page group just like the phones.

It is a little pricey, so if you need to save money you can go the route of opening up a sacrificial phone.

Title: Re: Intercom/Loudspeaker Paging
Post by: jrg0852 on October 23, 2013, 10:01:32 AM

Are they considering ceiling speakers? We have a customer that we use the IP paging unit with Viking amp and speakers. Works great for them.

Title: Re: Intercom/Loudspeaker Paging
Post by: johnp on October 23, 2013, 07:49:11 PM

Agree that the IP paging unit is over priced, but would be covered under warranty.