Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: Crowtalks on October 21, 2013, 12:39:59 PM

Title: quick default on SX200 AX 5.0
Post by: Crowtalks on October 21, 2013, 12:39:59 PM

We have an Sx200 AX 5.0 icp demo system that I am sending to another area for a couple of guys to train on. What is the fastest (or best) method to default the database on this unit?

thanks, Jim

Title: Re: quick default on SX200 AX 5.0
Post by: johnp on October 22, 2013, 07:31:32 AM

I would do a cf install with default database and then license form 4.

Title: Re: quick default on SX200 AX 5.0
Post by: Crowtalks on October 22, 2013, 12:16:20 PM

Thanks for the reply, I knew about the VF Work/CF default, but didn't know if there was a quick dirty way...

Title: Re: quick default on SX200 AX 5.0
Post by: acejavelin on October 29, 2013, 08:31:15 AM

Quote from: Crowtalks on October 22, 2013, 12:16:20 PM

Thanks for the reply, I knew about the VF Work/CF default, but didn't know if there was a quick dirty way...

Just restore a blank database... there should be one in the installer files for the software and, although I haven't checked in a while, you used to be able to grab them directly off Mitel's website in the SX200 downloads area.

There is no other real default on the 200.

Title: Re: quick default on SX200 AX 5.0
Post by: Crowtalks on October 29, 2013, 08:47:46 AM

Thanks