Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: will81 on October 09, 2013, 10:55:06 AM

Title: Programming Trunks Mitel SX-200
Post by: will81 on October 09, 2013, 10:55:06 AM

I'm new in thhis site, I hope you help me, I need this to make some changes in my work

Title: Re: Programming Trunks Mitel SX-200
Post by: ralph on October 09, 2013, 11:38:41 AM

We need to know what type of trunks you have before we can answer.

Ralph

Title: Re: Programming Trunks Mitel SX-200
Post by: will81 on October 14, 2013, 12:52:20 PM

I have many analog trunks but I want to receive all incoming calls to this number into one extension that I choose, if you need more detail tell me please

Title: Re: Programming Trunks Mitel SX-200
Post by: ralph on October 14, 2013, 01:10:09 PM

For analog trunks, look at the trunk service number of the trunk in the Trunk assignment form.
Then edit the form "Trunk Attributes" or "Trunk Service Assignment" depending on your software load.
Find the Trunk Service number referenced in the trunk assignment form.  You'll see where the Day/Night1/Night2 destinations are programmed.

Ralph

Title: Re: Programming Trunks Mitel SX-200
Post by: johnp on October 14, 2013, 01:23:54 PM

This is a 200 so programming would be form 14

Title: Re: Programming Trunks Mitel SX-200
Post by: will81 on October 14, 2013, 03:07:16 PM

Thanks, I'm going to check that