Mitel Forums - The Unofficial Source

Mitel Forums => MiVoice Office 250/Mitel 5000 => Topic started by: dfleschute on August 24, 2013, 07:59:18 AM

Title: How to swap card in 5600 Base Server
Post by: dfleschute on August 24, 2013, 07:59:18 AM

I want to swap a LSC for a SLC.  The physical swap is not the issue.  How do you change it in the programming?  DB Programming doesn't offer an option other than Exploring.  The Configuration Wizard will not allow changes.  It says you must use Communication Server View, which I cannot find a reference to in any of the manuals.  Even editing the programming in offline mode will only allow you to move current module bay locations.

Title: Re: How to swap card in 5600 Base Server
Post by: NTEDave on August 25, 2013, 07:28:01 AM

If you go into System then Controller so you see the cards currently installed in the right hand pane.

Single left click the card you want to change and it should be highlighted, single left click the card again and it should change into a drop down menu with all of the different card options you can have.

If you don't see the drop down menu you may have permissions issues on the log in you are using??

Title: Re: How to swap card in 5600 Base Server
Post by: dfleschute on August 27, 2013, 08:54:28 AM

Argh!  I've been double and right clicking.  "Patience, Danielson"  Thank you, sir.

Title: Re: How to swap card in 5600 Base Server
Post by: NTEDave on August 27, 2013, 09:47:10 AM

  ;D

Glad you have got it sorted!