Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: jprodzinski on July 23, 2013, 02:22:10 PM

Title: How can I schedule a weekly reboot (reset?) on the SX-200 ?
Post by: jprodzinski on July 23, 2013, 02:22:10 PM

I would like to schedule a weekly (weekend) reboot of the system.

Thank you.

Title: Re: How can I schedule a weekly reboot (reset?) on the SX-200 ?
Post by: acejavelin on July 23, 2013, 05:28:09 PM

No... why do you need to? I have never seen a 200 that needs to be rebooted that frequently, what issue do you have happening that you think that is the answer?

Title: Re: How can I schedule a weekly reboot (reset?) on the SX-200 ?
Post by: LoopyLou on August 01, 2013, 08:58:44 AM

Don't believe you can as was suggeswted there is no real reason to unlike the 3300 and it was only in older software.

Title: Re: How can I schedule a weekly reboot (reset?) on the SX-200 ?
Post by: jprodzinski on August 03, 2013, 03:15:48 PM

I have a problematic system.  After a time it will drop calls or calls to that location will randomly fast busy.  A reboot of the system always fixes it.  We have had our vendor troubleshoot it to death and even had the system replaced (all at a hefty billable hourly rate I may add).  At this point I am tired of dumping $ into it.  It seems a weekly reboot is my easy fix.

So if this isnt an option in the system itself could I write an SSH/Telnet script to log into it and reboot it?  If so what might that look like?

Thanks for the replies!

Title: Re: How can I schedule a weekly reboot (reset?) on the SX-200 ?
Post by: Crowtalks on August 09, 2013, 09:01:23 AM

I recently took over one that also starts behaving badly after a couple of months and a reboot fixes it for another couple of months. I'm assuming it's a memory leak. I go by the customer every couple of months and reboot it and it stays fine...if I forget to, it will go squirrely on me. Sounds like a manual reboot is the best option...

Jim