Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: august on June 26, 2013, 08:34:02 PM

Title: NTP server question
Post by: august on June 26, 2013, 08:34:02 PM

I have a cluster of 3 MxeIII, one Mxe Server and Nupoint.

They are all in the same network. 

I have an NTP server on the customer LAN.  It's working for the 3 MxeIII, but I have a problem with those using MSL (Nupoint and Mxe Server).

For those using MSL, the time will update when I put the NTP Server, but only for the first time.  I have to disable it, then enable it again to have the correct time.

I might be a network issue, but I found it strange that it's working on the 3300 and not the msl.....

Title: Re: NTP server question
Post by: acejavelin on June 27, 2013, 09:18:34 AM

This has something to do with time server, I have noticed this behavior occasionally when using the "pool.ntp.org" addresses, it seems to always work with the 3300 but sometimes it fails for MSL, although most of the time it works, but with the pool addresses they change all the time.