Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mevans1974 on June 21, 2013, 07:55:49 AM

Title: Precidia IPocket 232 on Mitel 3300 CXI
Post by: mevans1974 on June 21, 2013, 07:55:49 AM

Hi
Anyone have configure Precidia on Mitel 3300 for SMDR? I need the configuration for the precidia.

Any help would be great.

Thanks

Title: Re: Precidia IPocket 232 on Mitel 3300 CXI
Post by: jrg0852 on June 21, 2013, 09:17:34 AM

Here is a good starting point for you:

http://www.precidia.com/products/ipocket_232/

Title: Re: Precidia IPocket 232 on Mitel 3300 CXI
Post by: acejavelin on June 23, 2013, 09:48:58 AM

There really isn't much to it... I think it's in the tech handbook too (it is on the SX-200 tech handbook, just the ports are different)

Assuming you have everything setup in the 3300... Enter setup of the Ipocket, set all the local network parameters to "0.0.0.0" which means DHCP (the default), set the serial port parameters to whatever you need them to be, and then go into the remote configuration and set it to Telnet client and give it the IP address of the 3300 and port 1752. Save and reboot, you should get a banner message saying "Connected to <3300 IP Addr> on port 1752..." or something similar if successful.