Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: steve75 on March 14, 2013, 12:03:51 PM
-
Hi,
i need to download this release software for my customer with 3300 Mxe, but into Mitel site i don't find this release
MCD 4.1 Sp2 - 10.1.0.69_1
Its my problem or, mitel have delete this reference into download area?
Anyone can help me?
Steve
-
I don't see it either. If you have SWA, you can just do an upgrade.
-
Why not go to 4.2? I don't think you need SWA for in stream fixes.
-
I think you're right:
c. The following chart summarizes the following requirement whether new password is required for manually entering password in LOS ; OR whether you need to re-retrieve ARID via SI or ESM’s LOS during the upgrade to reflect the new password used.
From \ To MCD 4.0 MCD 4.1 & its SPs MCD 4.2 & its SPs
9.0 URs Yes Yes*
(see conditions above) Yes*
(see conditions above)
MCD 4.0 No Y Y
MCD 4.1 & its SPs N/A N/A N
MCD 4.2 & its SPs N/A N/A N
-
i have a copy of 10.1.1.11_2 here if needed, but if you can do 10.2 i would recommend it (or if you got valid software assurance you could look at mcd 5)
-
I have 10.1.0.69 if needed.
-
I have 10.1.0.69 if needed.
Reminder: Send it privately. We can't post that here.
Ralph
-
Thanks a lot for our reply!
Sarond send me a link to download a software release and i have solved my problem!
Thanks to all!
Steve
-
I think you're right:
c. The following chart summarizes the following requirement whether new password is required for manually entering password in LOS ; OR whether you need to re-retrieve ARID via SI or ESM’s LOS during the upgrade to reflect the new password used.
From \ To MCD 4.0 MCD 4.1 & its SPs MCD 4.2 & its SPs
9.0 URs Yes Yes*
(see conditions above) Yes*
(see conditions above)
MCD 4.0 No Y Y
MCD 4.1 & its SPs N/A N/A N
MCD 4.2 & its SPs N/A N/A N
Sorry to bring up an old thread.
Am I correct in assuming that if there is no active SWA that I can upgrade a system from MCD4.1 SPx to MCD4.2 SPx?
Has anybody tried this with inactive SWA? I thought any major release change needed SWA.
-
It should work, I upgraded a 4 something system to 4.2, didn't have access to the app record but it wouldn't go to 5.