Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: johnp on February 06, 2013, 12:28:52 AM
-
Anyone know if there is a true hardware difference between the 3300 and 200?
-
I have been told by tech support that purely hardware wise, they are virtually identical, however, the firmware and low-level code in the various pieces of hardware are different and not interchangeable or even capable of being "flashed" between the two platforms. I tested this with an Analog Main Board a few years back... lets just say it was sent back as "Bad out of box" and leave it at that.
-
Don't think so other then the obvious ( L2 switch ). No point in their being hardware differences for Mitel. Would just mean more parts to stock and higher manufacturing costs.
-
The analog boards are the same part and should be interchangable.