Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: small_eyes on January 14, 2013, 01:38:52 AM
-
Hi ALL,
i guess i overlook some setting, i make the button for another extension, if users on phone ..i can see the button turn read indictor they are busy..only if someone call to this extension, i can see the button key flashing...
may i know what part i missed?
-
Extension is busy and if someone dials that extension number the button starts flashing? If the phone was free that this is correct behaviour.
-
Hi,
Yes, but when user pick up the phone, the flash indicator will gone. and the button will not show red in solid....so that user didnt know when her boss finished the call...
-
also if user make the external call, on his scretary button key ...it didnt show red ....
-
also we are in Cluster environment. I check all the necessary setting, and still not make it workss
-
Have you checked these in system options?
(Optional) At both the local switch and remote switch(es)
In the System Options form, enable the following if required:
BLF - Busy Indication Based on Set Enabled
BLF - CFA Indication Based on Set Enabled
-
Looking a bit into this, have you set the key to secreterial...if so i don't think it gives a busy indication like a normal BLF key ,as, if the secretary tries to get the boss using the key it gives a busy tone then releases automatically. Look at the help for Direct Station Select.
-
thanks X man...system option didnt enable it..thanks