Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: Chriso on November 09, 2012, 08:37:55 AM

Title: 3300 Expanded Question
Post by: Chriso on November 09, 2012, 08:37:55 AM

Anyone know if there is a way to determine, through ESM, if a 3300MXe controller has been expanded?

Title: Re: 3300 Expanded Question
Post by: ghost on November 09, 2012, 09:02:06 AM

I am guessing you are talking about the 2nd processor to handle more than 350 users?
check out "Hardware Compute Cards"
if you see two cards there then you have the expansion install

if you are just after things like T1/E1 cards, DSP etc, then check out Hardware Modules

Title: Re: 3300 Expanded Question
Post by: Chriso on November 09, 2012, 09:59:53 AM

Thanks, Ghost.  I was referring to the 2nd processor.  I knew it would be there somewhere but have never looked at an expanded system.  I am assuming that with a 2nd preocessor, on the Hardware Compute Cards form there would be and entry for Slot ID 2?