Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: donbru01 on October 29, 2012, 01:50:53 PM

Title: Clock
Post by: donbru01 on October 29, 2012, 01:50:53 PM

sorry i have see that my system isn't Synchronize with PSTN .
I have Card on PLID 7 1 2 [1-30ch] , in network Synchronization what PLID need 7 1 2 1 ?

sorry i am not expert on ICP3300

Title: Re: Clock
Post by: acejavelin on October 29, 2012, 03:15:48 PM

The PLID for network sync is based on the circuit and hybrid, not a specific channel, the hybrid is almost always 1 (which circuit of a mated pair in a failover T/E-1 card), so the proper setting for your example would be:

Clock Source-Cabinet-Shelf-Slot-Hybrid-Slip Rate   
First-7-1-2-1-5

Title: Re: Clock
Post by: donbru01 on October 30, 2012, 10:18:15 AM

thanx