Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: tag on April 02, 2009, 10:03:03 AM

Title: Harddisk
Post by: tag on April 02, 2009, 10:03:03 AM

Any one tell me what will be the procedure if i want to replace a new haddisk and load the configuration to it?
at present system is running with one harddisk.

system 3300 mxe 8.0.7.16_2


tag

Title: Re: Harddisk
Post by: Mattmayn on April 02, 2009, 06:50:51 PM

Do you have the raid controller in the 3300?

Attached is the procedure from the THB.

Title: Re: Harddisk
Post by: chadmaynard on April 02, 2009, 10:26:54 PM

Are you asking about raid or just formatting a new disk and loading software on it?

Title: Re: Harddisk
Post by: tag on April 03, 2009, 05:15:00 AM

I have RAID controller and second HD also, now the system is running with 1 HD, so i am planning to Install second HD to the system.The attachement is interesting...... So will data load to new HD if i follow below mentioned procedure? or do i have to install data into second HD seperatly?

"11. To copy data onto the new drive, press and hold down the Mirror Cntrl
button of the new hard drive for between 6 and 10 seconds and then
release. Release the button when the Access LED starts flashing twice
per second."

tag

Title: Re: Harddisk
Post by: Mattmayn on April 03, 2009, 09:32:57 AM

Follow the directions on the PDF I posted earlier and everything should work just fine. This will take about four hours to complete so be patient.

Title: Re: Harddisk
Post by: MitelMania on April 10, 2009, 08:35:48 AM

one thing to note is that the system WILL operate and process calls normally while the drive copying takes place....
-Christopher