Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mlsthiel on September 26, 2012, 02:58:52 PM

Title: How to lookup extension status in Maintenance Commands 3300 mxe
Post by: mlsthiel on September 26, 2012, 02:58:52 PM

Hello
How can i lookup extension status in the Maintenance Commands. i this is possible i saw a engineer do it one time.

best regards

Title: Re: How to lookup extension status in Maintenance Commands 3300 mxe
Post by: ralph on September 26, 2012, 03:14:21 PM

How about "stat ext <extn>"

Ralph

Title: Re: How to lookup extension status in Maintenance Commands 3300 mxe
Post by: mlsthiel on September 27, 2012, 08:21:54 AM

A thumb up for ralph for his contribution to the forum.
he always give a comment.

I found the command i was looking for.
Here is my contribute to the forum

Locate Feature Extension <number>
with this command you can see de active  features  of a extension and other settings


example: locate feature extension 957

result:

IP Device ID:   72                                                             
Circuit Location : 1 3 1 72 1                                                   
Extension : 957                                                                 
Active Features :                                                               
Message Waiting Lamp On                                                         
Dialed Message Waiting.                                                         
Phone Lock: UnLocked                                                           
MAC Address : 08:00:0F:4B:F8:21