Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mayerfeld on September 20, 2012, 06:26:13 PM

Title: 1 digit System Speed Call Assignment
Post by: mayerfeld on September 20, 2012, 06:26:13 PM

Can I create a one digit System Speed Call, say "1" to dial an outside number?  What might I "break"?

People need to dial 8 or 9 to dial an outside number; all extensions are 3 digit.

I know it will pause to see if the person wants to dial more digits but I am ok with that. I just do not want to force other calls to that "1".

Title: Re: 1 digit System Speed Call Assignment
Post by: knoxs2011 on September 20, 2012, 06:30:19 PM

if your numeration its on 1xx for the xtensions, there it's a problem there, generally its no problem what number you place into tyhe ARS but, if there the same number on teh digits by xtension there is a problem

Title: Re: 1 digit System Speed Call Assignment
Post by: ralph on September 20, 2012, 07:01:46 PM

You can create a speed dial of '1' and point it to an outside number even if your extensions start with a '1'.
When you dial a number, if there is a conflict, the system will wait to see if you are going to dial more digits for a few seconds.   
Generally speaking there shouldn't be a problem.

Ralph

Title: Re: 1 digit System Speed Call Assignment
Post by: mayerfeld on September 21, 2012, 12:10:36 PM

thanks to both of you!

Title: Re: 1 digit System Speed Call Assignment
Post by: boycey9 on September 28, 2012, 10:40:14 AM

Better make sure your incomming digits dont start with a 1