Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: ralph on September 18, 2012, 03:25:23 PM
-
I have a system that is generating this log about every 2 minutes:
Hot Desk : login failed - Enabled in COS; device not supported 4085
The only difference in the logs are the numbers 4085, 2002, 3001 etc.
They're almost always different numbers.
Maintenance 1860 Info 2012/Sep/18 14:58:53 MOBILITY Hot Desk : login failed - Enabled in COS; device not supported 4085 Main Maintenance;0
Maintenance 1859 Info 2012/Sep/18 14:58:29 MOBILITY Hot Desk : login failed - Enabled in COS; device not supported 2002 Main Maintenance;0
Maintenance 1856 Info 2012/Sep/18 14:55:06 MOBILITY Hot Desk : login failed - Enabled in COS; device not supported 2021 Main Maintenance;0
Maintenance 1855 Info 2012/Sep/18 14:54:28 MOBILITY Hot Desk : login failed - Enabled in COS; device not supported 4083 Main Maintenance;0
Maintenance 1848 Info 2012/Sep/18 14:43:16 MOBILITY Hot Desk : login failed - Enabled in COS; device not supported 4081 Main Maintenance;0
Maintenance 1847 Info 2012/Sep/18 14:39:54 MOBILITY Hot Desk : login failed - Enabled in COS; device not supported 1001 Main Maintenance;0
Has anyone see this?
Ralph
-
Not seen this before, what type of programmed devices? Full, IPDevice or Multicall?
-
That's just it.
I've no clue.
They're mostly UCA softphones. They do have PrairieFyre.
MCD 4.2
Ralph
-
Hi Ralph,
Did you ever get to the bottom of this? I have a site doing the same thing using softphones with CCM, repeated errors in the logs:
"Hot Desk : login failed - Enabled in COS; device not supported xxx (DN)
Lat
-
That was 3 years ago.
I can't remember.
Shame on me for not posting the solution if I found one.
Ralph