Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: mcollier714 on September 18, 2012, 01:57:34 PM

Title: Mediatrix 4402 on 3300 ICP
Post by: mcollier714 on September 18, 2012, 01:57:34 PM

Hello. I'm fairly new to the Mitel system and need to hook up a Mediatrix 4402 on our 3300 ICP to use with a fax line. I have hooked up a Mediatrix 1102 before, but the 4402 has a different web gui and I do not know how to set it up the same. Has anyone set one of these up before?

Also, is there a better SIP device to use for a fax machine?

Thanks in advance!

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: ralph on September 18, 2012, 02:37:12 PM

We recently had some pretty good luck with Grandstream 286 ATA but I'm let to understand that particular ATA has been MD and superseded with a newer model.
Here's the link to the Grandstream analog adapters (http://www.grandstream.com/index.php/products/ip-voice-telephony/consumer-analog-telephone-adaptors) (Edit: This link has now expired)
But I think you can still get the 286 from Amazon (http://amzn.to/2bt76sk). 

Ralph

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: mcollier714 on September 18, 2012, 02:38:45 PM

And they use a SIP license? Is there a step-by-step setup anywhere?

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: ralph on September 18, 2012, 02:42:43 PM

They do use a SIP license.
I don't have a step by step set up guide but it's pretty simple.
The 1st one I set it took less than 15 min from the time I opened the box.

Ralph

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: mcollier714 on September 18, 2012, 02:43:28 PM

Cool. I will order one and give it a shot.

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: martyn on September 18, 2012, 07:55:02 PM

I tend to use the Linksys/Cisco ATA's. When it was branded as Linksys the PAP2T was the choice, but they have retired that product, and also the brand, so there is a Cisco replacement now that is equivalent and so far has been stable. Possibly it just takes a couple more minutes to configure, but that isn't a huge deal.

YMMV though on what I have experienced as things are different here down under than what you get in NA.

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: acejavelin on September 18, 2012, 10:39:17 PM

We use the Multi-Tech MultiVOIP line of SIP gateways with the 3300, had very good luck with them, although I will be honest and say we have never used them for faxing. On our hosted side of the house (Broadsoft SIP server), they use Audiocodes MP-112/114/118 gateways with really good success! We tried using the Grandstream HT-502 for fax applications but had hit and miss luck with them, if I was going to fax I would definitely go Audiocodes.

Attached is Mitel's latest SIP interop guide, you will notice few SIP Gateways that have been certified to work for faxing (T.38) with the 3300, Audiocodes being one of them. Hope it helps!

Title: Re: Mediatrix 4402 on 3300 ICP
Post by: stevek on September 20, 2012, 12:21:02 PM

We use LINKSYS PAP2T now called  CISCO SPA112.

We have constructed an installation guide (attached) that may help folks out.