Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: saidmsbah on September 09, 2012, 04:38:23 PM

Title: CO TRUNKS
Post by: saidmsbah on September 09, 2012, 04:38:23 PM

HOW to program 4 analog trunks (combo 4+12) and if incoming call go to extension (101) and  if i need co 1 dial(81) if i need co 1 dial(82)
if i need co 1 dial(83)  if i need co 1 dial(84)?

thanks a lot.

Title: Re: CO TRUNKS
Post by: ralph on September 09, 2012, 08:19:54 PM

In the Trunk Service Assignment form create 4 different entries.
In entry number 1 put 81 in the Day Ring field.
In entry number 2 put 82 in the Day Ring field
In entry number 3 put 83 in the Day Ring field
In entry number 4 put 84 in the Day Ring field

Ralph

Title: Re: CO TRUNKS
Post by: saidmsbah on September 10, 2012, 12:09:23 PM

thank you very much

but i need when dial 81 i get co 1 and when dial 82 i get co 2  etc;

when incoming call at co 1 telephone 100 will ring?

Title: Re: CO TRUNKS
Post by: ralph on September 10, 2012, 01:01:06 PM

Create a system speed dial for each one that used the "direct trunk select" feature code.

Speed dial '81'  actual number <feature code>+<Co trunk number 1>
Speed dial '82'  actual number <feature code>+<Co trunk number 2>
Speed dial '83'  actual number <feature code>+<Co trunk number 3>
Speed dial '84'  actual number <feature code>+<Co trunk number 4>

Ralph

Title: Re: CO TRUNKS
Post by: saidmsbah on September 12, 2012, 07:09:29 AM

MAKE ANALOG DEVISES TAKE TRUNK LINES WITH 81.82.83  -------------->

1- CLASS OF SERVES     
      CLASS OF SERVES NUMBER   = XX
      INDIVIDUAL TRUNK ACCESS  = YES

2- DTS SERVICE ASSIGNMENT                ( DIRECT TELEPHONE SELECT )
         INDEX=1
         CLASS OF SERVES     =  XX
         INTERCEPT NUMBER = 1

3-ANALOG TRUNK ASSIGNMENT 
               TRUNK NUMER          = XXXX
               DTS SERVICE NUMBER           = 1
                                                                                CIRCUIT DISCRIPTOR NUMBER    = 1
               INTERCONNECT NUMBER      = 1
               TENANT NUMBER         = 1
4- FEATURE  ACCESS COODE ASSIGNMENT
      INDIVIDUAL TRUNK ACCESS = *8
5- SPEED DIAL
       81= *80001
       82= *80002
       83= *80003
       84= *80004

Title: Re: CO TRUNKS
Post by: ralph on September 12, 2012, 07:54:30 AM

That looks right.   Did it work?

Ralph

Title: Re: CO TRUNKS
Post by: saidmsbah on November 01, 2013, 02:56:17 AM

yes it work writ

Title: Re: CO TRUNKS
Post by: LoopyLou on November 04, 2013, 08:00:45 AM

Also can setup a route for each trunk and use the access code as the ARS access code for each route.