Mitel Forums - The Unofficial Source

Mitel Forums => Mitel SX200, SX2000, and older SX platforms => Topic started by: patrickb on July 30, 2012, 09:57:13 AM

Title: SX200 el/ml fwding on busy from remote office
Post by: patrickb on July 30, 2012, 09:57:13 AM

I have an ext 256 at a remote office that fwds to mailbox 250 at the main office only on busy fwds n/a works properly. I have tried analog networking codes in form 22 to no avail. We are using pri cards at both locations going over a fiber point to point and two adtrans.
I have tested other offices that work and have copied it's programming to this site exactly but it's still doing it.  :o