Mitel Forums - The Unofficial Source
Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: eciroglu on June 16, 2012, 02:40:44 AM
-
Hi,
When i try to take a backup, backup fail occurs. There is logs are taken after backup fail:
Maintenance 2855 Info 2012/Jun/16 09:22:02 EntryBlock Maintenance: Category(Category1); msgFormatId(0) EntryBlock - Disable Block State Backup in progress with Mask 0x2 Main Maintenance;0
Software 2854 Error 2012/Jun/16 09:22:02 BRManager Progress Monitor - createBackupTask() Unable to determine if there is enough room for a backup Main BR_Manager.cpp;1233
Software 2853 Error 2012/Jun/16 09:22:02 BRManager BR_Manager->Failed to get space used for '/vmail/c/voxdrv' Main BR_Manager.cpp;930
Software 2852 Error 2012/Jun/16 09:22:02 ML_Defs directorySpaceUsed()->Failed to open directory (/vmail/c/voxdrv). Main ML_Defs.cpp;4399
Maintenance 2851 Info 2012/Jun/16 09:22:02 EntryBlock Maintenance: Category(Category1); msgFormatId(0) EntryBlock - Enable Block State Backup in progress with Mask 0x2 Main Maintenance;0
Maintenance 2850 Info 2012/Jun/16 09:22:02 BR_BackupCustomAppServer Maintenance: Category(Category1); msgFormatId(0) BR_BackupCustomAppServer - Backup starting (excluding Voicemail messages). (excluding call history records). Using FTP, the client will transfer the archive file to directory 'C:'. Main Maintenance;
I am using 3300cxi via release 8. Can you tell me why it occurs and how can it be fixed ?
Thanks.
Volkan,
-
Haven't seen this one before.
It would appear that the partition on the hard drive is full or there is corruption on the hard drive or the hard drive is failing.
Since the system backs up to the same partition as the voice mail, try having your users delete saved messages to clear some space. Then try backing it up without backing up the voice mail messages.
Ralph
-
Mailbox numbers are recently defined and have no recorded message. Hard drive is almost free. How can i test the hard drive to determine if it works correctly? Is there any ssh command or maintenance command?
Thanks.
Volkan,
-
Fromt he maintenance prompt, enter "dbms check full" and let it complete, it probably won't fix your problem but it can't hurt, then I would try stopping the vmail talks and restarts them...
From the serial port (or ssh terminal) enter:
iPVM_Stop
then when the command prompt returns enter
iPVM_Start
then when the command prompt returns, try the backup again... I have a system on MCD 4.2 that does something like this all the time, and although the log messages are slightly different, the problems we see and yours all seem to be related to free space on /vmail/ partition (yours in c/voxdrv/, mine problem is in /vmail/temp) and there isn't actually a problem, just something stuck in the iPVM tasks.
No guarantee it will work, but it is the only thing I can think of.
On another note, when did you last get a good backup? if it is fairly recent and the above stuff doesn't work I would recommend defaulting (or better yet a manual reinstall of software using the FixPartition flag), relicense and then restoring the database
-
Hi
Volkan
I think this particular type of backup problem may cause due to bad sectors present in hard drive. You should check your hard drive regarding bad sectors.
-
My backup problem has been solved after upgrading process.
Thank you for your precious replies.
Volkan,