Mitel Forums - The Unofficial Source

Mitel Forums => Mitel MiVoice Business/MCD/3300 => Topic started by: tag on February 28, 2009, 01:48:17 AM

Title: padlock
Post by: tag on February 28, 2009, 01:48:17 AM

Any one tell me how  "padlock" feature works in Mitel.

tag

Title: Re: padlock
Post by: eng-hany on March 12, 2009, 10:03:52 AM

1- enable phone lock in COS for IP sets or Analog sets not digital
2- assign codes for phone lock and phone unlock in Feature Access Code Form
3- assign user pin for the telephones in IP Set Configuration form for IP sets or Analog set Assignment form form for Analog sets

Title: Re: padlock
Post by: tag on March 12, 2009, 05:00:41 PM

Thanx eng-hany, i will try....

thanx

Title: Re: padlock
Post by: tag on March 27, 2009, 06:26:34 AM

2- assign codes for phone lock and phone unlock in Feature Access Code Form

I did not find any Feature like that?

tag

Title: Re: padlock
Post by: Mattmayn on March 27, 2009, 10:03:49 AM

They are between "Personal speedcall-store" and "Remote clear all features." Are you running a software version that supports it?

Title: Re: padlock
Post by: tag on March 27, 2009, 11:37:32 AM

In betwee those two features do not have,
I am using 8.0.7.16_2


tag

Title: Re: padlock
Post by: Mattmayn on March 27, 2009, 01:29:32 PM

The reason that you don't have the options is because it was not introduced until rel 9.0.0.41. Upgrade to at least 9.0 UR1 (9.0.0.41 is not considered a stable load) and it will work.

Title: Re: padlock
Post by: tag on March 27, 2009, 02:10:55 PM

Thank you

tag

Title: Re: padlock
Post by: dh_lab on December 22, 2009, 08:07:58 AM

when this feature is activated from the set, is their way to call internal number unless its de-activated.



dh_

Title: Re: padlock
Post by: bobcheese on December 22, 2009, 10:44:07 AM

extract from 3300 helpfile:

'Phone Lock has no effect on incoming calls but restricts outgoing calls, with the following exceptions: calls to emergency trunk routes and local operators.'

Although it doesnt specify what would be classed as a local operator. Try dialling 0 from a locked set.

Title: Re: padlock
Post by: dh_lab on December 23, 2009, 03:00:10 AM

I could not call any number while padlock is activated, even operator number 0 also.



dh